Pumps/Inflation

Replacement UHP head O-ring seal

A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.

Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Jar of 150

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Rebuild kit for the HP floor pump. - Compatible with Air Tool HP floor pump. - Includes O-ring, lube, and grommet.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.

- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually

MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges

The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!

Don't get caught looking like a geek, get Park's Pocket Protector Micro Pump. This miniature inflator fits in just about any pocket or pack and can also mount to your frame. It may be small, but it packs a punch, too, with its 100-psi capacity and adaptable head that fits Presta and Schrader valves. Plus, it comes with a dual-density, flip-out handle for maximum pumping power.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

20g CO2 cartridges contain a mid-sized charge suitable for higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.

The Airlift 200 is a single action bike pump that is compact enough to keep on hand anytime and anywhere. It has a large chamber to fill tires fast and a pump handle that locks in place for extra security. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Pump handle locks into place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

CO2 tire inflator. Blast off with our Airship 2.0 CO2 bike inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride. - Lightweight aluminum design stores cartridge and protects from cold cartridge when in use - Auto head fits both Presta and Schrader valves - Accepts 16g threaded and non-threaded cartridges - Includes one 16g threaded CO2 cartridge - Small size fits in saddle bag or jersey pocket - Length: 130mm - Weight: 123 grams

The Air Tool MTB pump is Speialized's most dependable and durable big-volume frame pump. It's intended to be carried on the bike for use in all off-road conditions. You'll find that it features a new inverted design, so it greatly increases air capacity, which reduces pump time by up to two minutes. - All new inverted, double chamber design increases the air handling capacity by 28% compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 100cc

The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc

The AirStream Inflator (INF-200) is MSW's ultra-small, minimalist compressed-air inflation device, featuring easy twist-on / twist-off operation and cartridge storage threads. - Composite body with alloy head - Plug to keep the cartridge interface clean - Simple twist on/off operation

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

Lezyne packed a complete CO2 inflator and tire repair kit in a simple, reusable poly bag. This kit includes a Twin Speed Drive inflator, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.