Parts & Accessories

Required attachment for Trek MT-201 trailer bikes. Genuine replacement parts. - Perfect for adding an attachment option to a second bike. - Fits hitch heads from 2004+ (30mm) - Includes multiple shims to fit most all seatpost sizes - Installation tool included

Enables you to attach a bicycle trailer kit to bicycles with hooded dropouts.

Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.

Don't let a little rain, or even a lot of rain, keep you and your little one(s) inside. Thule's Rain Cover is perfect for protecting your precious cargo from the elements, and can be used in place of, or in addition to your current weather cover.

Inside or outside, Thule's Storage Cover is perfect for protecting your Chariot carrier (sold separately) when it's not in use. Made of polyester, this cover is compatible with single and double carriers.

Thule's Bike Trailer Thru-Axle Adapters replace your 12mm rear thru-axle to let you connect your bike trailer to the bicycle.

Turn your Thule Glide/Urban Glide into a car seat transporter with Thule's Thule Infant Car Seat Adapter. This attachment is compatible with most infant car seats and allows you to face your baby while strolling.

Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.

Thule's Strolling Kit easily converts your Thule Chariot carrier (sold separately) into a stable, easy-rolling stroller. You get a pair of easy-turning 8-inch wheels that easily snap into the bottom of Thule's exclusive VersaWings (and store on top when not in use).

With Thule's Cougar/Cheetah Jogging Kit, you can jog on and off road with your little one safely in your Cougar or Cheetah carrier (sold separately). A smooth-rolling, 16-inch quick-release wheel and Thule's exclusive ezClick feature makes attachment/removal easy and fast.

Thule's Infant Sling fits inside Thule Chariot carriers (sold separately) providing a comfortable, secure way to carry your little one. It offers lateral support for excellent stability and is easy to install and remove. When used in a 2-passenger carrier, there's still plenty of room for a second child. Recommended for 1- to 10-month-old children, this handy accessory is ideal for strolling, jogging, and hiking.

Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

Burley replacement flag kit. Breaks down into two pieces. Reaches 6' high total.

This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.

Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction

Equip your bike for next-level adventures with the Burley Thru Axle. This simple-to-install adapter opens the door to new biking possibilities by allowing you to connect a kid, cargo, or pet bike trailer to bikes with 12mm thru axles. Use the Thru Axle Fit Guide to determine which Burley Thru Axle is compatible with your bike. If you are unsure of the correct thread pitch or hub length, please consult with the manufacturer of your bike or your local bike shop before purchasing a Burley Thru Axle. - SKU 960240 Thru axle, flat spacer, conical spacer, manual - SKU 960241 Thru axle, flat spacer, conical spacer, manual - SKU 960242 Thru axle, flat spacer, manual - SKU 960243 Thru axle, flat spacer, manual - SKU 960244 Thru axle, manual - SKU 960245 Thru axle, flat spacer, manual - SKU 960246 Thru axle, manual

Burley's adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. These thru axles have an external male threading on the end to accommodate the installation of Burley's axle mounted hitch system.