Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$16.99
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Speed Dial 7 Brake Levers
$18.00 - $29.99
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
Avid Disc Brake Pads (Juicy/BB7/BB5)
$19.99 - $25.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid FR-5 Brake Levers
$19.99 - $20.99
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Post-Mount Disc Brake Adaptor
$22.99
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
Avid Disc Brake Pads (Code)
$24.99 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$24.99 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Post Bracket
$26.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Avid Hydraulic Line Kit
$32.99 - $45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid G2 CleanSweep Rotor
$39.99 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid BB7 MTN Cable Disc Brake Caliper
$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
BOX Zero Stem Spacer Kit
$14.95
- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers
BOX X-Ray Brake Shoes
$24.95
- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads
BOX Cosine Chainring
$49.95
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
BOX Echelon Race Seat
$64.95
- Superlight co-molded nylon shell and carbon fiber seatpost specifically for BMX Race - Large saddle has a 27.2 seatpost, while the small has a 22.2 post
BOX Genius Brake Levers
$69.95
- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g
BOX Hollow Stem
$69.95
- Forged, CNC-machined 6061-T6 aluminum with hollow CrMo hex bolts - Open skeletal design and a dual mid-bolt wedge mounting system - 1" or 1-1/8" steerer clamp
Bike Yoke Bike Yoke Revive 2.0 Dropper Seatpost
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
Bikeway Bicycles The Sprint
$80.00
Sprint: Secure all components, Adjust drivetrain and brake system, True wheels, Lubricate chain and cables, Frame wipe down
Bikeway Bicycles The Works
$120.00
Works: Secure all components, Adjust drivetrain and brake system, True wheels, Lubricate chain and cables, Complete wash and degrease, Frame polish
Bikeway Bicycles The Bikeway
$250.00
The Bikeway Service Package: Secure all components, Adjust drivetrain and brake system, Lubricate chain and cables, Complete wash and degrease, Frame polish, Complete service of headset, bottom bracket, and hubs, precision wheel true.
Bikeway Bicycles Pro Package
$350.00
Pro Package: Secure all components, Adjust drivetrain and brake system, Lubricate chain and cables, Complete wash and degrease, Frame polish, Complete service of headset, bottom bracket, and hubs, Precision wheel true, New tires & tubes, New cables or brake bleed, New grips or Tape
Black Ops Donuts
$4.99
- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation
Black Ops Modder
$6.99
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post
Black Ops BMX Turbo Grips
$7.99
- Best seller - Shock Absorbing Design - Ridged Turbo Shape - Fits 7/8" Bars - Style: with Flange - Length: 110mm
Black Ops DefendR Lined Brake Cable Kit
$7.99
- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches
Black Ops Seat Clamp
$8.19
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy
Black Ops TriBlade
$8.39
- Cable hanger and straddle cable - Alloy construction - Anodized finish - Great for Canti and U-Brakes
Black Ops 19mm BB Washer
$9.39
- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack
Black Ops Dual Density Bar Grips
$9.99
- Closed-end high-flange design - Non-slip dual density waffle pattern - Grey flange and end cap with a black center - Made from durable dual density kraton rubber - Length: 130mm
Black Ops Flangeless Grit Bar Grips
$9.99
- Comfortable and durable kraton rubber with a micro diamond knurled surface - 130mm length with closed end and no flange - Flangeless design is suitable for MTB, BMX, or cruiser bars
Black Ops Grit Bar Grips
$9.99 - $13.99
- Comfortable and durable kraton rubber with a classic micro diamond knurled surface - 130mm length with closed end and BMX style flange
Black Ops FS170 Grips
$10.99
- Classic flangeless ribbed BMX style grips - Two-tone swirl pattern - Bar end plugs included - Length: 170mm
Black Ops DefendR Brake Cable Kit
$11.19
- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB
Black Ops Double Vise
$11.99
- Alloy 1-1/8" seatpost clamp - Double clamp design for extra holding power on BMX bikes
Black Ops Long Johns Grips
$12.59
- Diamond and ribbed pattern BMX grips - Flangeless - Longer 166mm length
Black Ops Bar Jammers
$13.99
- Bar end plugs - Sold in pairs
Black Ops Circle Grips
$13.99 - $14.99
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use - High flange BMX style design with black press-in end plugs - Length: 145mm
Black Ops Detangler Rotor Cable Double
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm
Black Ops Detangler Rotor Cable Fits All
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm
Black Ops Detangler Rotor Cable Flatland
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm
Black Ops Detangler Rotor Cable Poser
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm
Black Ops Detangler Rotor Cable X-Long
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: X-Long - Diameter: 1.5mm
Black Ops Flangeless Circle Bar Grips
$13.99 - $14.99
- A comfortable and timeless ribbed style grip suitable for BMX, MTB, and cruiser use with included black press-in end caps - Good all-around size for everyday use - Durable Kraton rubber construction - Length: 145mm
Black Ops Hinged 2-Finger Lever
$15.99 - $34.59
- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair
Black Ops Blade
$16.99
- Replacement steel sprockets for 1-piece BMX cranks - Mount Compatibility: 1-piece - Teeth: 43T - Chain Compatibility: 1/2-inch x 3/32-inch - Tooth Type: Standard
Black Ops Pimp
$16.99
- Replacement steel sprockets for 1-piece BMX cranks - Mount Compatibility: 1-piece - Teeth: 44T - Chain Compatibility: 1/2 x 3/32" - Tooth Type: Standard
Black Ops Cromo Seatpost
$17.99
- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm
Black Ops V-Type 2-Finger Lever
$17.99 - $19.99
- Forged alloy brake levers with reach adjustment - Compatible with linear pull and mechanical disc brakes - Left/Right: Set - Fits 22.2mm (7/8") handlebars
Black Ops Micro Drive Dual Core UL
$18.99 - $25.99
- Fits 3-piece 22mm BMX cranks - 2mm 6061 aluminum core - Includes adapter for 19mm spindles - Teeth: 25T - Chain Compatibility: Singlespeed - Tooth Type: Standard
Black Ops MXI
$19.99
- Traditional BMX handlebar design - For single-bolt BMX stems - Chrome-plated - Clamp Size: 1-inch - Width: 22.5-inch - Rise: 6-inch - Material: Steel
Black Ops Rotor Blade Detangler
$19.99
- Precise fit and smooth function - Great cable travel range - Shielded cables for durability - Includes upper and lower cables - Use: 1-1/8" BMX
Black Ops Knurled Pro
$21.39
- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair
Black Ops Drop Nose
$21.99
- Wrap-around composite base protects edges from abrasion and cuts - Durable padded top - Drop nose style - Use: BMX - Rail: Steel - Padding: Standard - Suspension: None
Black Ops MX / Free Style Saddle
$21.99
- Designed for street riding and dirt jumping - Compact design keeps it low and out of your way - 7mm rails handle the abuse of BMX riding - Composite frame protects saddle from abrasion - Use: BMX - Rail: Steel, 7mm - Cover Material: Emerald - Suspension: None - Size (LxW): 8.75 x 5"
Black Ops Tactile Silicone Non-Flanged Grips
$21.99
- Hand-conforming silicone formula provides grip and shock absorption - Silicone construction won't dull, harden, or fade over time - 128mm length - End plugs included
Black Ops CT 2.0 Chain Tensioner
$22.99
- CNC machined 6061-T6 aluminum chain tensioners - Compatible with 3/8 inch and 10mm axles - Single bolt operation makes tensioning a simple task - Material: 6061AL
Black Ops 4 Bolt Alloy BMX Stem
$23.99
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
Black Ops Lead Foot
$23.99
- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs
Page 1 of 20 Next page