Filter By:
Parts & Accessories

$3.00
- Protects cranks from damage caused by overtightening pedals
- Can be used for bike fit adjustments, dependent on pedal thread length engagement

$3.99
Replacement cone nut for Kink Senec pedals, includes cone, washer, and o-ring. Right and left side specific.

$3.99
Replacement cone nut for Kink Senec pedals, includes cone, washer, and o-ring. Right and left side specific.

$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$10.00
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
- Package includes two cleat stackers.

$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair

$10.95
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$12.79
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Look Keo System
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 45 grams/pair

$12.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.

$12.99
- Fits most platform pedals
- Two wooden riser blocks w/durable rubber band
- Adds 3/4" to each side (1-1/2" total)

$15.99
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float

$15.99
Oversized, forged, and machined hollow spindle with a unique bearing-less design. No more bent spindles or blown out bearings.
TECH SPECS
- Compatible with Senec Pedal only
- Installation: 6mm Allen Key or 3/8" Ratchet Drive
- Weight: 4.2oz

$15.99
Oversized, forged, and machined hollow spindle with a unique bearing-less design. No more bent spindles or blown out bearings.
TECH SPECS
- Compatible with Senec Pedal only
- Installation: 6mm Allen Key or 3/8" Ratchet Drive
- Weight: 4.2oz

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$17.00
Serfas' MTB Cleats are durable steel replacement cleats for use with Shimano SPD-compatible clipless pedals and shoes. They offer 4 degrees of float and weigh 73 grams per pair. If your old cleats are Shimano model SH51, SH55 or SH56, these replacements will work. Installation hardware is included.

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$18.00
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Weight of 24 grams per cleat
- 4.5-degree floating arc

$19.00
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.

$19.00
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
- Not compatible with Shimano PD-M858 (XTR) SPD pedals

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
Page 1 of 3
Next page