Skip to main content

Filter By:

Forks

Specialized Chisel Carbon Fatboy Rigid Fork
$400.00
Lighten the mood with Specialized's Chisel Carbon Fatboy Rigid Fork. The uni-directional full carbon monocoque structure with carbon legs, crown, and steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with 135mm hub and SBC OS28 end-caps for increased stiffness.
Specialized Ohlins RXF 36 Coil 27.5+/29-inch Fork
$1,150.00
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
Specialized RXF 36 27.5+/29er Fork
$1,150.00
The Ohlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Ohlins has increased the stanchions to 36mm and upped the spacing to 110mm while retaining the ultra-stiff alloy unicrown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy unicrown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 15x110mm spacing makes it compatible with most 29-inch and 27.5+ setups.
Specialized RockShox SID WC with Brain
$1,300.00
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping—combined, they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The all-new Brain damper uses position sensitive technology for better chassis balance and traction. It does this while retaining the ability to separate rider input from bump events on the trail—just some of the incredible stuff that Brain is known for. The new technology can now remain active during the initial 25mm of travel, and this creates a much more balanced riding position and supple front-end feel. In turn, this goes a long way in reducing rider fatigue. And although the fork feels more active initially, as soon as you standup to get on the gas, the forward shift in weight naturally compresses the fork into the platform. So yeah, you'll feel well supported and efficient during hard sprint efforts. Incredibly, Brain does all this while keeping you in control and riding smooth on rough terrain without any need for extra cables and lockout levers on the handlebars. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models, either. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered Full Carbon Steerer tube - Top-adjust Brain damper w/ Position Sensitive technology - 110mm spacing with Torque Cap compatibility - 100mm of travel
RockShox Pike Ultimate
$899.00
A true trail machine we couldn't wait to have on our bikes and get to you. Featuring an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control for every sweeping corner or loamy drop in. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide lasting fork performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper option featuring independent high and low-speed compression adjust - Charger 2.1 RCT3 damper option featuring 3-position compression adjust (open/pedal/firm) with low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
Kink CST Forks
$129.99 - $139.99
Kink CST forks (CST being short for CAST) aren't your average forks. The first standout feature on these forks are the dropouts which are investment cast, allowing for a design that greatly increases the strength without adding too much weight or bulk. These dropouts are all about putting the material where you need it, and not where you don't. In addition to the dropouts, the forks feature tapered and internally butted fork legs; a one-piece, fully CNC-machined steerer tube; fork blade ends relieved for peg clearance; and flush inner fork legs for great hub guard clearance. A custom-formed fork leg profile also improves fork leg and steerer tube junction strength by adding increased welding surface. TECH SPECS - Fork Height: 315mm - Steerer Tube: 165mm - Length Dropout: 28mm - Dropout Slot: 3/8" (10mm) - Bearing Race: Integrated Campy Spec - Compression Bolt Thread: M24×1.5mm - Compression Bolt Hex: 7075-T6 3/8" Ratchet and 6mm - Tubing Material: 100% 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Particulars: Tapered Fork Legs with Internal Butting - 6mm Investment Cast Dropouts - Flush Dropout and Leg Junction for Hub Guard Clearance - Weight: 34.8oz (Including Fork Bolt)
Kink Foundation II Forks
$134.99
Kink Foundation II forks are a traditional style fork that still utilizes the latest technologies and materials available. Available in two different offsets to suit any riding style, the 26mm offset dropouts offer a quicker more responsive feel while the 32mm offset provides a more classic and stable ride. The investment cast fork leg ends provide a clean and smooth look, while the laser-cut and CNC'd dropouts provide the classic shape and provide ample strength. The tapered outer profile and internally butted fork legs keep the strength and weight right where they should be. A one-piece fully CNC-machined steerer tube with integrated bearing race helps keep things a little bit simpler too. TECH SPECS - Fork Height: 315mm - Steerer Tube Length: 165mm - Dropout Offset: 26mm or 32mm - Dropout Slot: 3/8" (10mm) - Bearing Race: Integrated Campy Spec - Compression Bolt Thread: M24×1.5mm - Compression Bolt Hex: 7075-T6 3/8" Ratchet and 6mm Allen Key - Tubing Material: 100% 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Particulars: Tapered Fork Legs with Internal Butting - 4mm Laser-Cut Dropouts - Weight: 34.8oz (Including Fork Bolt)
Kink Stoic Forks
$139.99 - $159.99
Kink Stoic forks put the focus on strength first and foremost while maintaining a great aesthetic and super modern geometry. The custom-formed, tapered, and ovalized fork legs create additional hub guard clearance while providing a ton of stiffness. Internally butted tubing adds all the strength where it's needed, while keeping everything at a reasonable weight, both in the fork legs and steerer tube. The investment cast fork leg ends feature clean, debossed K-Brick logos in the back and a generous radius in the front for plenty of peg clearance. TECH SPECS - Fork Height: 316mm - Steerer Tube Length: 165mm - Dropout Offset: 15mm or 20mm - Dropout Slot: 10mm (3/8") - Dropout Thickness: 5mm Laser-Cut - Bearing Race: Integrated - Compression Bolt Thread: M24×1.5mm - Compression Bolt Hex: 7075-T6 3/8" Ratchet and 6mm Allen Key - Tubing Material: 100% 4130 Chromoly Steel - Fork Leg: Tapered Oval with Internal Butting - Fork Leg Ends: Investment Cast with K-Brick Logo - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 34.1oz (Including Fork Bolt)
Fox Racing Shox 36 Factory Series GRIP2 29-inch
$1,139.00
The undisputed all-mountain champion. The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit. "Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Own the mountain with the award-winning 36, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - GRIP2 damper and FLOAT EVOL air spring - Low friction seals for improved performance
Dimension Threadless 700c Cyclocross/Hybrid Fork
$90.00
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c
Page 1 of 1