Light weight 20mm thru axle MTB front hub. Forged from light weight alloy with Hi Lo flanges maximizing the strength-to-weight ratio. - 20mm thru axle alloy front hub - Hi Lo flange with CNC disc brake mounts - 2 sealed cartridge bearings
$199.00 - $219.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left- and right-hand-drive options, the Deploy hub has you covered. - Hub shell: 6061-T6 aluminum 36-hole - Axle: Heat-treated chromoly - Nuts: 17mm steel - Bearings: 4 sealed cartridges - Weight: 22.0oz
$223.90 - $267.90
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz
Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - 9T Freecoaster - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/Guards Installed)
Page 1 of 1